|
pH Stable
Description:
Raises pH
Type:
Freshwater, Marine & Brackish Water Conditioner
Available In:
100, 250, 500 ,1000 grams & 1 gallon
Part Numbers:
PHS100, PHS250, PHS500, PHS1000 PHS4000
Description:
Safely raises pH of tap or aquarium water when used as directed. The use of a
good pH test kit is absolutely necessary while using this product, and the use
of an alkalinity test kit is strongly recommended! CAUTION! Many electronic pH
pens and probes drift over time and frequent calibration with a good test kit is
strongly recommended!
Directions:
First read the considerations for use section below. This is a professional
strength product. Exercise care! If in doubt, use less, then measure pH.
Consult an authoritative guide for the proper pH for the type of fish you are
keeping. Add 1/8 (one-eighth) teaspoon powder to a pint (1/2 liter) of tank
water and mix well. Disperse this amount around the tank for every 20 gallons
(80 liters) of tap or tank water to raise pH. PH stabilization takes 24 hours.
Considerations for use:
FRESHWATER AQUARIUMS: If you are using Reverse Osmosis water or if your tap
water is very soft (low total or general hardness, or GH), use Kent R/O Right
first to increase total dissolved solids to the proper value. Measure the
Total Alkalinity (buffering capacity, carbonate hardness, or KH) of your water
with an alkalinity test kit. If the alkalinity is low (see chart below), add
Kent pH STABLE to raise it to the proper level. Next measure the pH.
If it is low, add this product as directed to bring the pH up. Never change pH
more than .2 pH per day! Wait 24 hours for pH to stabilize, between adjustments!
SALTWATER OR BRACKISH AQUARIUMS: Use Kent Marine
Superbuffer-dKH or Marine Aquarium pH Buffer to raise the
alkalinity (i.e. carbonate hardness or KH) to the proper value. This is
recommended to be 10 to 12 dKH or 3.5 to 4.5 meq/liter or 175 to 225 ppm. Wait
24 hours for pH to stabilize. If pH is low, add this product as directed.
AFRICAN CICHLID OR ALKALINE FRESHWATER AQUARIUMS:
First use A F Cichlid Chemistry as directed, then Kent A F Cichlid Buffer to
raise the alkalinity (i.e. carbonate hardness or KH) to the proper value. This
is recommended to be 10 to 12 dKH or 3.5 to 4.5 meq/liter or 175 to 225 ppm.
Wait 24 hours for pH to stabilize. If pH is low, add this product as directed.
Contents:
Carbonic Acid Salts
Precautions:
Contains strongly basic carbonic acid salts. Do not breathe fumes. Avoid contact
with skin. Do not mix with household chemicals! Corrosive and irritating!
Harmful if swallowed! Keep out of reach of children! First Aid: If swallowed:
rinse mouth, give water. In the event of eye or skin contact, flush with water
for at least 15 minutes. CONTACT A PHYSICIAN IMMEDIATELY! |
